Have you noticed
leaking shower taps?

Leaking showers are annoying, especially if your bedroom is placed next to the shower. Apart from the noise that it creates all day, you must be serious about the electricity and water waste. However, if you worry about how to fix a leaky two handle shower faucet, it is similar to fixing a regular basin tap, as the only difference lies in the spring-loaded flange. This keeps the shower head flat against the shower wall. Over time, the entire tap comes off if the tap handle’s screw lid becomes loose due to regular use. So, call in specialised personnel to your place to fix leaking shower taps.

Though repairing showers are usually left to the repair person, you can easily repair minor repairs without professional help too. But if you’re unsure about implementing temporary plumbing solutions, professional repair saves you from the serious consequences of increased leaks. To prevent severe property damage because of leaks, call the specialists from Tai Irwin Plumbing immediately.

How do you detect a leaking shower?

Though detecting leaking shower taps seems to be a simple task, you must ensure that it’s beyond your plumbing capabilities. Check for mildew or mould building up in the bathroom, along with unsightly water stains or peeling paint. If you’ve noticed the aforementioned signs of damage, you must know how to fix leaking shower taps or, at least, reach out to an expert who does. Common causes behind leaking shower taps could be cracked or worn-out cartridges, poorly-fitted handles, mineral deposit build up, shower tray movement, sealant issues and faults.

Other possible reasons could be loosened or damaged tap washer, loosened or damaged O-ring, tap damage, old or incorrectly-fitted solder connections to the shower, chips in tile grouting and cracks in the grout.

Leaking Tap Experts tips to fix leaking shower tap, You can easily fix the issue with a few simple steps:

  1. Turn off the water supply: Locate the main water shut-off valve for your home and turn off the water supply to your shower. This step will prevent any water from flowing while you are working to fix leaking shower tap.
  2. Remove the handle: Use a screwdriver or Allen wrench to remove the handle of the leaking shower tap. This will expose the cartridge or valve inside the faucet.
  3. Replace the cartridge or valve: Depending on your leaking shower tap model, you may need to replace the cartridge or valve. Remove the old one by unscrewing it and installing the new cartridge or valve in its place. Make sure to align it properly and tighten it securely.
  4. Check and replace washers and seals: If the shower tap leaking continues after replacing the cartridge or valve, you may need to check the washers and seals. These components can wear out over time and cause leaks. Remove them and replace leaking shower taps with new ones if necessary.
  5. Reassemble and test: Once you have replaced any faulty components, reassemble the leaking shower tap by attaching the handle back in place. Turn on the water supply and test the shower tap leaking to see if the leak has been resolved. If it still leaks, you may need to seek further assistance or consider contacting Leaking Tap Experts.

Remember to always take safety precautions when working with plumbing fixtures and, if unsure, consult a professional Leaking Tap Experts to ensure proper shower tap repair.

How should you repair a leaking shower tap?

Do you know how to fix a leaking shower faucet single handle? If so, before you attempt, ensure that you turn off the main and hot water supply. Fix leaking shower heads by soaking the showerhead in white vinegar, which removes hard water deposits. Alternatively, check for worn-out O-rings and washers — and replace them as needed. The easiest thing to do is to get Tai Irwin Plumbing’s leaking tap experts.